Snap-in panel mounting with neon/LED indication in red, green or blue lenses for power equipment and industrial cabinets.
- Rated current
- 16A
- Rated voltage
- 250VAC
- Ingress protection
- IP40
- Life
- 50,000
- model: KCD1-16A
- series: KCD1
RK-13cut-out 22.0 × 30.0 mm
RK-13 Heater Rocker Switch
RK-13
A 16 A 250 VAC rocker switch with heat-resistant housing and multi-stage power control, purpose-built for heaters and high-power appliances.
- Rated current
- 16A
- Rated voltage
- 250VAC
- Circuit
- SPST / DPST
- Ingress protection
- IP40
- Termination
- Quick-connect #187
- Actuator
- Rocker
- Snap-in panel mounting, no screws
- Up to 16 A current carrying capacity
- Optional LED or neon indication
- Heat-resistant housing for heating appliances
Overview
Overview
A 16 A 250 VAC rocker switch with heat-resistant housing and multi-stage power control, purpose-built for heaters and high-power appliances.
Key features
- Snap-in panel mounting, no screws
- Up to 16 A current carrying capacity
- Optional LED or neon indication
- Heat-resistant housing for heating appliances
Specifications
| model | RK-13 |
| series | Heater |
| ratedCurrent | 16A |
| ratedVoltage | 250VAC |
| circuit | SPST / DPST / multi-stage |
| actuator | Rocker (illuminated optional) |
| terminal | #187 quick-connect |
| ipRating | IP40 |
| operatingForce | 4.0 N max |
| mechanicalLife | 50,000 cycles min |
| electricalLife | 10,000 cycles min |
| contactResistance | ≤ 20 mΩ |
| insulationResistance | ≥ 100 MΩ |
| dielectricStrength | 2000 VAC / 1 min |
| operatingTemp | 0℃ ~ +125℃ |
| mounting | Snap-in panel, cut-out 22 × 30 mm |
| dimensions | 30.0 × 25.0 × 32.0 mm |
| contactMaterial | Silver tin oxide |
| housingMaterial | PA66 (UL94 V-0) |
| approvals | CQC · CE · RoHS |
Manufacturing & quality
RK-13 is produced entirely in the HAOSWITCH factory through injection moulding → high-speed stamping → automated assembly → 100% inspection and packing. Critical processes run under SPC control; operating point and electrical performance are verified 100% inline with data pushed to MES, giving forward and backward traceability for every lot.
Customisation
We provide OEM / ODM customisation covering: actuator type and length, termination (solder / PCB / quick-connect / cable), operating force and travel, housing colour and printing, cable length and connectors, and packing (bulk / tape-and-reel / tube). Moulds are developed in-house — 15 days from drawing approval to first article.
Customer recognition is our highest honour — the only reason we keep investing in R&D and quality systems.
Same series
View allProduct
Need a quote or samples for this part?
Send your requirement and an engineer will confirm specifications and commercial terms.