Qualität
Qualität wird gemessen
ISO 9001 zertifiziert. Produkte entsprechen UL, CQC, ENEC, CE, RoHS und REACH.
PROCESS
Vier Qualitätstore
IQC
Incoming quality control
- Contact strip composition verified by spectrometry
- Spring material hardness and thickness sampling
- Flammability re-test per plastic lot
- Annual supplier audit and rating
IPQC
In-process quality control
- SPC control charts on critical processes
- 100% inline operating-point and travel check
- Automatic line stop and traceability on anomaly
- First-article approval and patrol inspection
FQC
Final quality control
- 100% contact resistance and dielectric test
- CCD visual inspection of every part
- Sampled life and temperature-rise validation
- Packing and label verification
OQC
Outgoing quality control
- AQL sampling standard applied
- Lot traceability code shipped with goods
- Outgoing inspection reports archived
- Customer-specific requirements checked item by item
UL reliability laboratory
Prüfkapazität im Labor
The lab is not only for outgoing inspection — it feeds the R&D loop, compressing new-material validation from six weeks to ten days.
Mechanical life
10,000,000
32 parallel channels
Electrical life
100,000
Under load
Salt spray
480 h
Neutral / acetic
Thermal shock
200 cycles
-40 ~ +105℃
Temperature rise
±0.5℃
16 channels
Glow wire
850℃
IEC 60695
Insulation resistance
≥100 MΩ
500 VDC
IP rating
IP67
IEC 60529
COMPLIANCE
Zertifizierung & Konformität
Products comply with UL, cUL, ENEC, CQC, CE, RoHS and REACH; the factory is ISO 9001:2015 certified.
Lot traceability system
The lot code on every label traces forward to final inspection records and backward to material batch, machine and operator.
Trace depth
Material → finished
Record retention
5 years
Complaint response
24 h
8D report
5 working days
Calibration cycle
12 months
Internal audit
Annual
Request the full quality documentation pack
Includes system certificates, product approvals, reliability reports and a PPAP sample — sent by an engineer within 24 hours.