おすすめ
IP67 via triple protection — silicone gasket, ultrasonic welding and potted terminals — validated by 96 h salt spray, for outdoor and automotive exterior mechanisms.
- 定格電流
- 5A
- 定格電圧
- 250VAC
- 保護等級
- IP67
- Life
- 1,000,000
- model: MS-IP67-5A
- series: IP67
KW12-IP6529.0 × 10.3 × 16.5 mm
KW12-IP65 Water-Jet Resistant Micro Switch
KW12-IP65
IP65 dust-tight and water-jet resistant — a cost-effective protection level for kitchen, bath and cleaning equipment.
- 定格電流
- 10A
- 定格電圧
- 250VAC
- 回路形式
- SPDT
- 保護等級
- IP65
- 端子形式
- Quick-connect
- アクチュエータ
- Lever
- Silicone gasket + ultrasonic welding + potted terminals
- IP65 or IP67 to your requirement
- Validated by 96 h neutral salt-spray
- UL-recognised cable for weather resistance
概要
Overview
IP65 dust-tight and water-jet resistant — a cost-effective protection level for kitchen, bath and cleaning equipment.
Key features
- Silicone gasket + ultrasonic welding + potted terminals
- IP65 or IP67 to your requirement
- Validated by 96 h neutral salt-spray
- UL-recognised cable for weather resistance
Specifications
| model | KW12-IP65 |
| series | IP65 |
| ratedCurrent | 10A |
| ratedVoltage | 250VAC |
| circuit | SPDT |
| actuator | Hinge lever |
| terminal | #187 quick-connect |
| ipRating | IP65 |
| operatingForce | 2.0 N max |
| mechanicalLife | 500,000 cycles min |
| contactResistance | ≤ 25 mΩ |
| insulationResistance | ≥ 100 MΩ |
| dielectricStrength | 1500 VAC / 1 min |
| operatingTemp | -25℃ ~ +85℃ |
| dimensions | 29.0 × 10.3 × 16.5 mm |
| contactMaterial | Silver alloy |
| housingMaterial | PBT + silicone (UL94 V-0) |
| approvals | CQC · CE · RoHS |
Manufacturing & quality
KW12-IP65 is produced entirely in the HAOSWITCH factory through injection moulding → high-speed stamping → automated assembly → 100% inspection and packing. Critical processes run under SPC control; operating point and electrical performance are verified 100% inline with data pushed to MES, giving forward and backward traceability for every lot.
Customisation
We provide OEM / ODM customisation covering: actuator type and length, termination (solder / PCB / quick-connect / cable), operating force and travel, housing colour and printing, cable length and connectors, and packing (bulk / tape-and-reel / tube). Moulds are developed in-house — 15 days from drawing approval to first article.
Customer recognition is our highest honour — the only reason we keep investing in R&D and quality systems.
同シリーズ
すべて見る製品詳細
この製品の見積・サンプルが必要ですか？
ご要望をお送りいただければ、技術者が仕様を確認し商条件をご提案します。